Basket

0 items

No products in the basket.

Translate

Share this page

wallmounted one amp

INTEGRATORS

Rocoil 'Wall-Mounted' Rogowski Coil Current Measuring System With 1A Output Current Drivers

The Rocoil® Oneamp is a three-channel integrator that can be used in conjunction with either flexible or rigid Rogowski coils to provide accurate current measurement in an industrial environment. Output from the integrator is an AC current waveform up to 1A and the system is intended as a substitute for a 1A secondary current transformer.

Request a Quote Download Datasheet

Rocoil 'Wall-Mounted' Rogowski Coil Current Measuring System With 1A Output Current Drivers Features

Three-channel Integrator enclosed in a steel cabinet
Can measure up to hundreds of kA
Input and output protection against surges
Current output to directly replace a 1A current transformer
Sensitivity can be specified by the user
Sensing coils can be replaced without the need for re-calibration
Excellent low-frequency response
Flexible Rogowski coils can be fitted without 'breaking' the conductor
Withstands very large overloads for an indefinite time
Can be configured for dual inputs i.e. the output is the sum of the currents in two conductors

These integrators provide an output that accurately reproduces the waveform of the current being measured. This includes complex waveforms, which have a high harmonic content, and transients.The measuring system cannot be harmed by current overloads. Also, unlike a current transformer, there is no danger from high voltages if the output from the coil is open-circuited.

Product Options

/DUAL Two inputs instead of one. Enables the currents in two separate conductors to be summed.
Sensitivity range: This can be specified by the user as Amps RMS / 1A RMS.Sensitivity values up to more than 100kA/A can be provided.

For more information download the 'Wall-Mounted' Rogowski Coil Current Measuring System With 1A Output Current Drivers datasheet or request a quote

Request a Quote Download Datasheet